ABB RELION REX640 Technical Manual page 110

Section 3
Basic functions
104
Table 28: Warning indications and codes
Warning indication
Watchdog reset
Power down det.
DNP3 warning
Dataset warning
Report cont. warning
GOOSE contr. warning
SCL config warning
Logic warning
SMT logic warning
GOOSE input warning
ACT warning
GOOSE rec. warning
AFL warning
SMV warning
Comm. channel down
Settings mismatch
Protection comm.
ARC1 cont. light
ARC2 cont. light
ARC3 cont. light
ARC4 cont. light
RTD meas. warn.,slot D
RTD meas. warn.,slot C
mA output warn.,slot D
mA output warn.,slot C
Warning code
10
11
22
24
25
26
27
28
29
30
31
32
33
34
35
36
50
85
86
87
88
-54
-50
-24
-20
1MRS759142 C
Additional information
A watchdog reset has occurred.
The auxiliary supply voltage has
dropped too low.
Error in the DNP3
communication
Error in the Data set(s)
Error in the Report control
block(s)
Error in the GOOSE control
block(s)
Error in the SCL configuration
file or the file is missing
Analog channel configuration
warning
Error in the SMV configuration
Redundant Ethernet (HSR/
PRP) communication
interrupted
Mismatch between parameter
settings and application
configuration
Error in protection
communication
A continuous light has been
detected on the ARC light input
1.
A continuous light has been
detected on the ARC light input
2.
A continuous light has been
detected on the ARC light input
3.
A continuous light has been
detected on the ARC light input
4.
Abnormal signal from sensor(s)
received in slot D
Abnormal signal from sensor(s)
received in slot C
Temporary error occurred in
RTD module located in slot D
Temporary error occurred in
RTD module located in slot C
REX640
Technical Manual