1. Manuals
  2. Brands
  3. ABB Manuals
  4. Protection Device
  5. Relion 615 series
  6. Product manual

ABB RELION 615 Series Product Manual

Transformer protection and control
Hide thumbs Also See for RELION 615 Series:
Table of Contents

Advertisement

Quick Links

See also: Technical Manual , Operating Manual
—
RELION® 615 SERIES
Transformer Protection and Control
RET615
Product Guide

Advertisement

Table of Contents
loading

Related Manuals for ABB RELION 615 Series

Summary of Contents for ABB RELION 615 Series

  • Page 1 — RELION® 615 SERIES Transformer Protection and Control RET615 Product Guide...

  • Page 2: Table Of Contents

    30. Document revision history........... 62 Disclaimer The information in this document is subject to change without notice and should not be construed as a commitment by ABB. ABB assumes no responsibility for any errors that may appear in this document.

  • Page 3: Description

    RET615 is a member of ABB’s application functionality of the Protection and Control IED Manager PCM600. Further, the application configuration ®...
  • Page 4 Transformer Protection and Control 1MRS756891 M RET615 Product version: 5.0 FP1 RET615 TRANSFORMER PROTECTION AND CONTROL RELAY STANDARD CONFIGURATION PROTECTION LOCAL HMI ALSO AVAILABLE - Disturbance and fault recorders - Event log and recorded data - High-Speed Output module (optional) Configuration System Time...
  • Page 5 Transformer Protection and Control 1MRS756891 M RET615 Product version: 5.0 FP1 RET615 TRANSFORMER PROTECTION AND CONTROL RELAY STANDARD CONFIGURATION PROTECTION LOCAL HMI ALSO AVAILABLE - Disturbance and fault recorders - Event log and recorded data - High-Speed Output module (optional) Configuration System Time...
  • Page 6 Transformer Protection and Control 1MRS756891 M RET615 Product version: 5.0 FP1 RET615 TRANSFORMER PROTECTION AND CONTROL RELAY STANDARD CONFIGURATION PROTECTION LOCAL HMI ALSO AVAILABLE - Disturbance and fault recorders - Event log and recorded data - High-Speed Output module (optional) Configuration System Time...
  • Page 7 Transformer Protection and Control 1MRS756891 M RET615 Product version: 5.0 FP1 RET615 TRANSFORMER PROTECTION AND CONTROL RELAY STANDARD CONFIGURATION PROTECTION LOCAL HMI ALSO AVAILABLE - Disturbance and fault recorders - Event log and recorded data - High-Speed Output module (optional) Configuration System Time...
  • Page 8 Transformer Protection and Control 1MRS756891 M RET615 Product version: 5.0 FP1 RET615 TRANSFORMER PROTECTION AND CONTROL RELAY STANDARD CONFIGURATION PROTECTION LOCAL HMI ALSO AVAILABLE - Disturbance and fault recorders - Event log and recorded data - High-Speed Output module (optional) Configuration System Time...
  • Page 9 Transformer Protection and Control 1MRS756891 M RET615 Product version: 5.0 FP1 RET615 TRANSFORMER PROTECTION AND CONTROL RELAY STANDARD CONFIGURATION PROTECTION LOCAL HMI ALSO AVAILABLE - Disturbance and fault recorders - Event log and recorded data - High-Speed Output module (optional) Configuration System Time...
  • Page 10 Transformer Protection and Control 1MRS756891 M RET615 Product version: 5.0 FP1 RET615 TRANSFORMER PROTECTION AND CONTROL RELAY STANDARD CONFIGURATION PROTECTION LOCAL HMI ALSO AVAILABLE - Disturbance and fault recorders - Event log and recorded data - High-Speed Output module (optional) Configuration System Time...
  • Page 11 Transformer Protection and Control 1MRS756891 M RET615 Product version: 5.0 FP1 RET615 TRANSFORMER PROTECTION AND CONTROL RELAY STANDARD CONFIGURATION PROTECTION LOCAL HMI ALSO AVAILABLE - Disturbance and fault recorders - Event log and recorded data - High-Speed Output module (optional) Configuration System Time...
  • Page 12 Transformer Protection and Control 1MRS756891 M RET615 Product version: 5.0 FP1 Table 1. Standard configurations Description Std. conf. Transformer differential with low-impedance restricted earth-fault protection on the HV side Transformer differential with low-impedance restricted earth-fault protection on the LV side Transformer differential with high-impedance restricted earth-fault protection on the HV side Transformer differential with high-impedance restricted earth-fault protection on the LV side Transformer differential with voltage protection and measurements, and low-impedance restricted earth-fault protection on the...
  • Page 13 Transformer Protection and Control 1MRS756891 M RET615 Product version: 5.0 FP1 Table 2. Supported functions Function IEC 61850 Protection Three-phase non-directional overcurrent PHLPTOC1 protection, low stage PHLPTOC2 Three-phase non-directional overcurrent PHHPTOC1 protection, high stage PHHPTOC2 Three-phase non-directional overcurrent PHIPTOC1 protection, instantaneous stage PHIPTOC2 Non-directional earth-fault protection, low stage EFLPTOC1...

  • Page 14: Protection Functions

    Transformer Protection and Control 1MRS756891 M RET615 Product version: 5.0 FP1 Table 2. Supported functions, continued Function IEC 61850 RTD/mA measurement XRGGIO130 Frequency measurement FMMXU SMVSENDER 6)7) IEC 61850-9-2 LE sampled value sending IEC 61850-9-2 LE sampled value receiving SMVRCV 6)7) (voltage sharing) Other...

  • Page 15: Application

    Transformer Protection and Control 1MRS756891 M RET615 Product version: 5.0 FP1 4. Application allows up to eight analog signals to be measured via the six RTD RET615 provides main protection for two-winding power inputs and the two mA inputs using transducers. The RTD and transformers and power generator-transformer blocks.
  • Page 16 Transformer Protection and Control 1MRS756891 M RET615 Product version: 5.0 FP1 3I (HV) RET615 U12 0. 0 kV P 0.00 kW Q 0.00 kVAr IL2 0 A Clear Std. conf. ANSI 3Ith>T 50L/50NL 50P/51P 3I>>> 51P/51N 3I/Io Io (LV) 87NH dIoHi>...
  • Page 17 Transformer Protection and Control 1MRS756891 M RET615 Product version: 5.0 FP1 RET615 Std. conf. U12 0. 0 kV P 0.00 kW 3I (HV) Q 0.00 kVAr IL2 0 A ANSI Clear 27/59 3U</3U> 3Ith>T 50L/50NL 50P/51P 3I>>> Io (HV) 51P/51N 3I/Io 87NL dIoLo>...

  • Page 18: Supported Abb Solutions

    615 series relays without the optional power systems. To facilitate the system engineering, ABB's single-line diagram feature are used. The Web HMI of relays are supplied with connectivity packages. The...

  • Page 19: Control

    GOOSE communication GOOSE communication GUID-4D002AA0-E35D-4D3F-A157-01F1A3044DDB V4 EN Figure 13. ABB power system example using Relion relays, COM600S and MicroSCADA Pro/System 800xA 6. Control outputs which have originally been configured for other RET615 integrates functionality for the control of a circuit purposes, when applicable, or an external input or output breaker via the front panel HMI or by means of remote controls.

  • Page 20: Measurements

    Transformer Protection and Control 1MRS756891 M RET615 Product version: 5.0 FP1 7. Measurements The binary signal channels can be set to start a recording either The relay continuously measures the high voltage (HV) side and on the rising or the falling edge of the binary signal or on both. the low voltage (LV) side phase currents and the neutral current By default, the binary channels are set to record external or of the protected transformer.

  • Page 21: Condition Monitoring

    Transformer Protection and Control 1MRS756891 M RET615 Product version: 5.0 FP1 PROCESS LEVEL USER LEVEL Process events 1024 (FIFO) Fault records (FIFO) Fault summary; Trip timestamp, Function, Currents, Voltages, etc. Audit trail events (FIFO) 2048 System and security-related events; Configuration changes, Control, Login, etc. Disturbance records n…100...

  • Page 22: Fuse Failure Supervision

    Transformer Protection and Control 1MRS756891 M RET615 Product version: 5.0 FP1 14. Fuse failure supervision 210 V. Both phase-to-phase voltages and phase-to-earth Depending on the chosen standard configuration, the relay voltages can be connected. In addition, the binary input includes fuse failure supervision functionality. The fuse failure thresholds 16…176 V DC are selected by adjusting the relay’s supervision detects failures between the voltage measurement parameter settings.
  • Page 23 Transformer Protection and Control 1MRS756891 M RET615 Product version: 5.0 FP1 modelling. The relay supports Edition 2 and Edition 1 versions sampled values using IEC 61850-9-2 LE protocol. The intended of the standard. With Edition 2 support, the relay has the latest application for sampled values shares the voltages to other 615 functionality modelling for substation applications and the best series relays, having voltage based functions and 9-2 support.
  • Page 24 Transformer Protection and Control 1MRS756891 M RET615 Product version: 5.0 FP1 COM600 SCADA Ethernet switch Ethernet switch IEC 61850 PRP GUID-334D26B1-C3BD-47B6-BD9D-2301190A5E9D V2 EN Figure 15. Parallel redundancy protocol (PRP) solution HSR applies the PRP principle of parallel operation to a single sender node discards the frame to avoid loops.
  • Page 25 Transformer Protection and Control 1MRS756891 M RET615 Product version: 5.0 FP1 COM600 Devices not supporting HSR SCADA Ethernet switch Redundancy Redundancy Redundancy IEC 61850 HSR REF620 RET620 REM620 REF615 REF615 GUID-7996332D-7FC8-49F3-A4FE-FB4ABB730405 V1 EN Figure 16. High availability seamless redundancy (HSR) solution The choice between the HSR and PRP redundancy protocols switch-over.
  • Page 26 Transformer Protection and Control 1MRS756891 M RET615 Product version: 5.0 FP1 Client A Client B Network A Network B Managed Ethernet switch Managed Ethernet switch with RSTP support with RSTP support GUID-AB81C355-EF5D-4658-8AE0-01DC076E519C V4 EN Figure 17. Self-healing Ethernet ring solution All communication connectors, except for the front port records are supported.
  • Page 27 Transformer Protection and Control 1MRS756891 M RET615 Product version: 5.0 FP1 The relay supports the following high accuracy time • Layer 2 mapping synchronization method with a time-stamping resolution of 4 µs • Peer to peer delay calculation required especially in process bus applications. •...

  • Page 28: Technical Data

    Transformer Protection and Control 1MRS756891 M RET615 Product version: 5.0 FP1 18. Technical data Table 6. Dimensions Description Value Width Frame 177 mm Case 164 mm Height Frame 177 mm (4U) Case 160 mm Depth 201 mm (153 + 48 mm) Weight Complete protection relay 4.1 kg...
  • Page 29 Transformer Protection and Control 1MRS756891 M RET615 Product version: 5.0 FP1 Table 9. Binary inputs Description Value Operating range ±20% of the rated voltage Rated voltage 24...250 V DC Current drain 1.6...1.9 mA Power consumption 31.0...570.0 mW Threshold voltage 16...176 V DC Reaction time <3 ms Table 10.
  • Page 30 Transformer Protection and Control 1MRS756891 M RET615 Product version: 5.0 FP1 Table 12. Signal outputs and IRF output Description Value Rated voltage 250 V AC/DC Continuous contact carry Make and carry for 3.0 s 10 A Make and carry 0.5 s 15 A Breaking capacity when the control-circuit time constant L/R<40 ms, at 1 A/0.25 A/0.15 A...
  • Page 31 Transformer Protection and Control 1MRS756891 M RET615 Product version: 5.0 FP1 Table 15. High-speed output HSO with BIO0007 Description Value Rated voltage 250 V AC/DC Continuous contact carry Make and carry for 3.0 s 15 A Make and carry for 0.5 s 30 A Breaking capacity when the control-circuit time constant L/R <40 ms, at 5 A/3 A/1 A...
  • Page 32 Transformer Protection and Control 1MRS756891 M RET615 Product version: 5.0 FP1 Table 20. Degree of protection of flush-mounted protection relay Description Value Front side IP 54 Rear side, connection terminals IP 20 Table 21. Environmental conditions Description Value Operating temperature range -25...+55ºC (continuous) Short-time service temperature range 1)2)
  • Page 33 Transformer Protection and Control 1MRS756891 M RET615 Product version: 5.0 FP1 Table 22. Electromagnetic compatibility tests Description Type test value Reference 1 MHz/100 kHz burst disturbance test IEC 61000-4-18 IEC 60255-26, class III IEEE C37.90.1-2002 • Common mode 2.5 kV •...
  • Page 34 Transformer Protection and Control 1MRS756891 M RET615 Product version: 5.0 FP1 Table 22. Electromagnetic compatibility tests, continued Description Type test value Reference Power frequency immunity test Binary inputs only IEC 61000-4-16 IEC 60255-26, class A • Common mode 300 V rms •...
  • Page 35 Transformer Protection and Control 1MRS756891 M RET615 Product version: 5.0 FP1 Table 25. Environmental tests Description Type test value Reference Dry heat test • 96 h at +55ºC IEC 60068-2-2 • 16 h at +85ºC Dry cold test • 96 h at -25ºC IEC 60068-2-1 •...
  • Page 36 Transformer Protection and Control 1MRS756891 M RET615 Product version: 5.0 FP1 Protection functions Table 29. Three-phase non-directional overcurrent protection (PHxPTOC) Characteristic Value Operation accuracy Depending on the frequency of the measured current: f ±2 Hz PHLPTOC ±1.5% of the set value or ±0.002 × I PHHPTOC ±1.5% of set value or ±0.002 ×...
  • Page 37 Transformer Protection and Control 1MRS756891 M RET615 Product version: 5.0 FP1 Table 31. Non-directional earth-fault protection (EFxPTOC) Characteristic Value Operation accuracy Depending on the frequency of the measured current: f ±2 Hz EFLPTOC ±1.5% of the set value or ±0.002 × I EFHPTOC ±1.5% of set value or ±0.002 ×...
  • Page 38 Transformer Protection and Control 1MRS756891 M RET615 Product version: 5.0 FP1 Table 33. Negative-sequence overcurrent protection (NSPTOC) Characteristic Value Operation accuracy Depending on the frequency of the measured current: f ±1.5% of the set value or ±0.002 × I Minimum Typical Maximum 1)2)
  • Page 39 Transformer Protection and Control 1MRS756891 M RET615 Product version: 5.0 FP1 Table 36. Residual overvoltage protection (ROVPTOV) main settings Parameter Function Value (Range) Step Start value ROVPTOV 0.010...1.000 × U 0.001 Operate delay time ROVPTOV 40...300000 ms Table 37. Three-phase undervoltage protection (PHPTUV) Characteristic Value Operation accuracy...
  • Page 40 Transformer Protection and Control 1MRS756891 M RET615 Product version: 5.0 FP1 Table 39. Three-phase overvoltage protection (PHPTOV) Characteristic Value Operation accuracy Depending on the frequency of the measured voltage: f ±2 Hz ±1.5% of the set value or ±0.002 × U Minimum Typical Maximum...
  • Page 41 Transformer Protection and Control 1MRS756891 M RET615 Product version: 5.0 FP1 Table 42. Three-phase thermal overload protection, two time constants (T2PTTR) main settings Parameter Function Value (Range) Step Temperature rise T2PTTR 0.0...200.0°C Max temperature T2PTTR 0.0...200.0°C Operate temperature T2PTTR 80.0...120.0% Short time constant T2PTTR 6...60000 s...
  • Page 42 Transformer Protection and Control 1MRS756891 M RET615 Product version: 5.0 FP1 Table 44. Stabilized and instantaneous differential protection for two-winding transformers (TR2PTDF) main settings Parameter Function Value (Range) Step High operate value TR2PTDF 500...3000 %I Low operate value TR2PTDF 5...50 %I Slope section 2 TR2PTDF 10...50%...
  • Page 43 Transformer Protection and Control 1MRS756891 M RET615 Product version: 5.0 FP1 Table 46. Stabilized restricted earth-fault protection (LREFPNDF) main settings Parameter Function Value (Range) Step Operate value LREFPNDF 5...50 %I Minimum operate time LREFPNDF 40...300000 ms Restraint mode LREFPNDF 1 = None 2 = Harmonic2 Start value 2.H LREFPNDF...
  • Page 44 Transformer Protection and Control 1MRS756891 M RET615 Product version: 5.0 FP1 Table 50. Circuit breaker failure protection (CCBRBRF) main settings Parameter Function Value (Range) Step Current value CCBRBRF 0.05...2.00 × I 0.05 Current value Res CCBRBRF 0.05...2.00 × I 0.05 CB failure mode CCBRBRF 1 = Current...
  • Page 45 Transformer Protection and Control 1MRS756891 M RET615 Product version: 5.0 FP1 Table 54. Multipurpose protection (MAPGAPC) main settings Parameter Function Value (Range) Step Start value MAPGAPC -10000.0...10000.0 Operate delay time MAPGAPC 0...200000 ms Operation mode MAPGAPC 1 = Over 2 = Under Table 55.
  • Page 46 Transformer Protection and Control 1MRS756891 M RET615 Product version: 5.0 FP1 Control functions Table 56. Tap changer position indication (TPOSYLTC) Descrpition Value Response time for binary inputs Typically 100 ms...
  • Page 47 Transformer Protection and Control 1MRS756891 M RET615 Product version: 5.0 FP1 Condition and supervision functions Table 57. Circuit-breaker condition monitoring (SSCBR) Characteristic Value Current measuring accuracy ±1.5% or ±0.002 × I (at currents in the range of 0.1…10 × I ±5.0% (at currents in the range of 10…40 ×...
  • Page 48 Transformer Protection and Control 1MRS756891 M RET615 Product version: 5.0 FP1 Measurement functions Table 60. Three-phase current measurement (CMMXU) Characteristic Value Operation accuracy Depending on the frequency of the measured current: f ±2 Hz ±0.5% or ±0.002 × I (at currents in the range of 0.01...4.00 × I Suppression of harmonics DFT: -50 dB at f = n ×...
  • Page 49 Transformer Protection and Control 1MRS756891 M RET615 Product version: 5.0 FP1 Table 65. Sequence voltage measurement (VSMSQI) Characteristic Value Operation accuracy Depending on the frequency of the voltage measured: f ±2 Hz At voltages in range 0.01…1.15 × U ±1.0% or ±0.002 × U Suppression of harmonics DFT: -50 dB at f = n ×...
  • Page 50 Transformer Protection and Control 1MRS756891 M RET615 Product version: 5.0 FP1 Other functions Table 69. Pulse timer (PTGAPC) Characteristic Value Operate time accuracy ±1.0% of the set value or ±20 ms Table 70. Time delay off (8 pcs) (TOFPAGC) Characteristic Value Operate time accuracy ±1.0% of the set value or ±20 ms...

  • Page 51: Local Hmi

    Transformer Protection and Control 1MRS756891 M RET615 Product version: 5.0 FP1 19. Local HMI default single line diagram. The SLD view can also be accessed The relay is available with two optional displays, a large one and using the Web browser-based user interface. The default SLD a small one.

  • Page 52: Mounting Methods

    (PST), a Next-Generation Order Number circuiting the CT secondary circuits when a relay unit is Tool, supports order code creation for ABB Distribution withdrawn from its case. The relay case is further provided with Automation IEC products with emphasis on, but not exclusively a mechanical coding system preventing the current measuring for, the Relion product family.

  • Page 53: Accessories And Ordering Data

    Transformer Protection and Control 1MRS756891 M RET615 Product version: 5.0 FP1 23. Accessories and ordering data Table 74. Cables Item Order number Optical sensor for arc protection, cable length 1.5 m 1MRS120534-1.5 Optical sensor for arc protection, cable length 3.0 m 1MRS120534-3 Optical sensor for arc protection, cable length 5.0 m 1MRS120534-5...

  • Page 54: Tools

    Transformer Protection and Control 1MRS756891 M RET615 Product version: 5.0 FP1 24. Tools (Internet Explorer). For security reasons, the Web HMI is The protection relay is delivered as a preconfigured unit. The disabled by default but it can be enabled via the local HMI. The default parameter setting values can be changed from the front- Web HMI functionality can be limited to read-only access.

  • Page 55: Cyber Security

    Transformer Protection and Control 1MRS756891 M RET615 Product version: 5.0 FP1 Table 77. Supported functions Function Web HMI PCM600 Relay parameter setting ● ● Saving of relay parameter settings in the relay ● ● Signal monitoring ● ● Disturbance recorder handling ●...

  • Page 56: Terminal Diagrams

    Transformer Protection and Control 1MRS756891 M RET615 Product version: 5.0 FP1 26. Terminal diagrams GUID-3CB989EB-6ECA-471F-8692-DB15C1DE5EFB V2 EN Figure 23. Terminal diagram of standard configurations A-D...
  • Page 57 Transformer Protection and Control 1MRS756891 M RET615 Product version: 5.0 FP1 GUID-3655E0AF-034F-4D63-B098-5B5321A13662 V1 EN Figure 24. Terminal diagram of standard configurations E-H...

  • Page 58: Certificates

    RET615 Product version: 5.0 FP1 27. Certificates 28. References DNV GL has issued an IEC 61850 Edition 2 Certificate Level A1 www.abb.com/substationautomation portal provides information on the entire range of distribution automation ® for Relion 615 series. Certificate number: 7410570I-OPE/INC products and services.

  • Page 59: Functions, Codes And Symbols

    Transformer Protection and Control 1MRS756891 M RET615 Product version: 5.0 FP1 29. Functions, codes and symbols Table 78. Functions included in the relay Function IEC 61850 IEC 60617 IEC-ANSI Protection Three-phase non-directional overcurrent protection, PHLPTOC1 3I> (1) 51P-1 (1) low stage PHLPTOC2 3I>...
  • Page 60 Transformer Protection and Control 1MRS756891 M RET615 Product version: 5.0 FP1 Table 78. Functions included in the relay, continued Function IEC 61850 IEC 60617 IEC-ANSI Multipurpose protection MAPGAPC1 MAP (1) MAP (1) MAPGAPC2 MAP (2) MAP (2) MAPGAPC3 MAP (3) MAP (3) MAPGAPC4 MAP (4)
  • Page 61 Transformer Protection and Control 1MRS756891 M RET615 Product version: 5.0 FP1 Table 78. Functions included in the relay, continued Function IEC 61850 IEC 60617 IEC-ANSI Fault record FLTRFRC1 FAULTREC (1) FAULTREC (1) Three-phase current measurement CMMXU1 3I (1) 3I (1) CMMXU2 3I (2) 3I (2)

  • Page 62: Document Revision History

    Transformer Protection and Control 1MRS756891 M RET615 Product version: 5.0 FP1 Table 78. Functions included in the relay, continued Function IEC 61850 IEC 60617 IEC-ANSI Generic control point (16 pcs) SPCGAPC1 SPC (1) SPC (1) SPCGAPC2 SPC (2) SPC (2) Analog value scaling SCA4GAPC1 SCA4 (1)
  • Page 64 ABB Distribution Solutions Distribution Automation P.O. Box 699 FI-65101 VAASA, Finland Phone +358 10 22 11 ABB Distribution Automation Maneja Works Vadodara-390013, India Phone +91 265 2604386 +91 265 2638922 www.abb.com/mediumvoltage www.abb.com/relion www.abb.com/substationautomation © Copyright 2018 ABB. All rights reserved.

This manual is also suitable for:

Ret615

Table of Contents