4.3 Verify Installation
Ahead of the startup sequence, make sure that the following installation steps have been
completed:
Sample lines
l
Exhaust line
l
AC power connection
l
Relay wiring
l
See "Installation" on page 33 for connection details.
4.4 Power Up
Use the rack power switch behind the front door to power up the Vertex M system.
1. Open front door.
2. Turn on rack power switch.
3. Turn on power switch to appropriate analyzers.
4. Close and latch front door.
After 15 seconds, the analyzer status LEDs sequence four times through all colors.
Vertex M
48
User Manual