Honeywell Vertex M User Manual page 226

7. Expand the tree on the left to reveal the Vertex M server as highlighted in purple the
Matrikon OPC Explorer window in Figure 8-20.
8. Click on Server then select Add Group. The example name is g1.
9. Select the group as shown highlighted in Figure 8-22.
10. Click on Group then select Add Items. The group's Matrikon Explorer window opens.
11. In the group's explorer window, make sure that the Write Access checkbox is unchecked.
12. Select an item from the list of Available Items (as shown underlined in pink in the
MatrikonOPC Explorer (g1) window.
13. Double click on a tag as shown underlined in green in the MatrikonOPC Explorer (g1)
window.
14. Confirm that the desired tag name appears in the Item ID textbox.
15. Click the large arrow (Add) button as highlighted in yellow in the MatrikonOPC Explorer
(g1) window.
16. Repeat above steps as desired. It is also possible to add tags by right-clicking on the tag
and selecting Add all items to tag list.
17. Click on File then select Close
18. Verify that the tag quality is Good as shown in light-blue in the Matrikon OPC Explorer
window in Figure 8-22.
Matrikon OPC Explorer window
Vertex M
Figure 8-23. Matrikon OPC Explorer Window
226 User Manual