Fault Indicators
In addition to changing color, an event window opens indicating a new event.
A yellow square inside the status bar in the analyzer block indicates an analyzer-specific fault. A
yellow square inside of the point block indicates a point-specific fault.
See "Maintenance Faults" on page 143 for more information.
l
See "Information Events" on page 152 for more information.
l
5.3.2 Point Detail Display Area
The Point Detail Area (see Figure 5-1) displays comprehensive information about each location.
Touching a block in the System Display Area displays the current information about a location.
Config File
The configuration profile file name
User ID
The name of the current, logged in user
Location
The short name of the sampled location
Tier- Slot-
Points are identified by the tier, slot and their point number in which the
Point
analyzer is installed
Points not needed for monitoring may be disabled. A disabled point does not
Point
trigger alarms
See "Event History" on page 92 for more information.
l
See "Data Trend" on page 97 for more information.
l
See "Event List" on page 100 for more information.
l
Vertex M
85
User Manual