Configure Analyzers And Points; Set Analyzer Window - Honeywell Vertex M User Manual

4.6.3 Configure Analyzers and Points

Press "Configure Analyzer/Points" to change the right side of the Configuration window to a
display representing physical layout of the Vertex M system. Each slot is represented by a two-
part button.
When the analyzer has been configured, the top of the button displays the type of analyzer and
the gas family. The bottom of the button is a second button for configuring each point within
the analyzer.

4.6.4 Set Analyzer Window

To configure the type of analyzer slot, press the top of the button representing the slot. The Set
Analyzer Window opens.
Vertex M 59 User Manual