Table of Contents
Advertisement
Honeywell RapidZone
Outdoor Temp
To View Zone or Rooftop Data
Press the Building Vw Button—>
GENERAL
The command display shows system variables and alarms.
You can also modify setpoints, schedules, basic system
parameters and acknowledge alarms at the display. Easy
navigation between building, zone and diagnostic views allow
you to quickly tailor the RapidZone system for comfort and
energy savings.
The system must first be configured using the RapidZone
Software package. The RapidZone software is designed pri-
marily for your HVAC contractor to configure and monitor your
rooftop unit (RTU) and zone controllers. For more information
refer to the RapidZone Application Guide 74-3449 and the
S7760A Command Display User Guide 74-2974.
The command display is an easy way to make changes to the
schedules and other configuration options after the Rapid-
Zone application is downloaded.
Room temperature, setpoints, occupancy schedules, equip-
ment alarms, current date and password access are some
data screens that you are able to work with when using the
RapidZone command display.
S7760A COMMAND DISPLAY
FOR RAPIDZONE SOLUTION
SUNDAY 12:00:00 AM
60.3 DF
!!
Silence
Alarms
Setting
BuildingVw
Select
Back
74- 3450-2
M18305A
Advertisement
Table of Contents
Related Manuals for Honeywell S7760A
Summary of Contents for Honeywell S7760A
- Page 1 (RTU) and zone controllers. For more information refer to the RapidZone Application Guide 74-3449 and the S7760A Command Display User Guide 74-2974. The command display is an easy way to make changes to the schedules and other configuration options after the Rapid- Zone application is downloaded.
- Page 2 ZONES Control data and settings for individual zones can be viewed and modified using the RapidZone command display. A typical screen is displayed below. TO CHANGE TEMPERATURE SETPOINTS Starting at the Main screen, make the following selections to select the specific zone whose setpoint you want to change. Main—>BuildngVw—>Zone Data—>Zone Name Zone Name Next...
- Page 3 Schedules The RapidZone solution allows the user to define up to eight separate schedules that specify different periods throughout the day where temperatures in the assigned zones will be maintained at the occupied setpoint for comfort, or the unoc- cupied setpoint for energy savings. Each of these schedules can be assigned to any single zone or combination of zones using the RapidZone software.
- Page 4 Enter the required password and press Apply. (Refer to the password section.) There are four types of schedules: • Days—for daily operating hours under normal conditions. • Temp—for temporary operating hours not associated with holidays. • Special—for special hours that can be assigned to holidays.
- Page 5 Temporary periods affect all zones assigned to that schedule. SPECIAL The Special softkey is used to define up to three sets of oper- ating hours that can be assigned to scheduled holidays. • Press the Special softkey: SCHEDULE 1 Special_1 E1 08:00 AM OCC E2 01:00 PM UNOCC E3 02:00 PM UNCNFIG...
- Page 6 Diagnostics The Rooftop Unit Diagnostics screen provides a quick status of critical system parameters. Main—>BuildngVw—>Rooftop Unit Diagnostics Rooftop Unit Diagnostics Schedule CoolFailure EconoFailure HeatFailure LowStaticPAlm Page Up FanFailure Page Down M18586A NOTES: — FanFailure appears only when monitoring a system with a proof of air flow sensor. —...
-
Page 7: Setting Changes
Alarms are listed in order of occurrence and are displayed in the following format: • <Object name>: control that originated the alarm. • <Alarm Text>: text corresponding to Alarm Type. • <Additional Alarm Text>: additional text if available. • Sequence #: sequence number of alarm. •... -
Page 8: Rooftop Units (Rtu)
NOTES: — Level 3 has the highest privilege while level 1 has the lowest privilege. — Initial settings for all passwords are 0 0 0 0. Time Use this screen to view or change the date and time. Press- ing Apply saves the modified settings. Main—>Settings—>Time Time Sept/7/2000... -
Page 9: Data Point Information
RTU Controller: displays discharge air temperature DischargeAir Temp: displays discharge air temperature Fan Status: indicates the actual fan status when an optional fan sensor has been installed Outdoor Air Temp: displays outside air temperature Status Filter: displays alarm when filter needs service IMPORTANT The Rooftop Unit Control settings can be modified by pressing the ChngValue softkey and entering... -
Page 10: Rooftop Unit Diagnostics Data
Rooftop Unit Diagnostics Data Heat Failure: heating alarm status, off = no alarm BuildngVw —> Rooftop Unit Diagnostics Cool Failure: cooling alarm status, off = no alarm BuildngVw —> Rooftop Unit Diagnostics Economizer Failure: economizer alarm status, off = no alarm BuildngVw —>... - Page 11 74-3450—2...
- Page 12 'RXJODV 'ULYH 1RUWK '\QDPL. 'ULYH *ROGHQ 9DOOH\ 01 6.DUERURXJK 2QWDULR 09 = Printed in U.S.A. on recycled paper containing at least 10% 74-3450—2 J.H. Rev. 02-01 post-consumer paper fibers. Copyright © 2001 Honeywell All Rights Reserved www.honeywell.com...