Maintenance - Honeywell Vertex M User Manual

5.6.3 Maintenance

Use the Maintenance window to:
Load and change Chemcassette™ tape. See "Change Chemcassette™ Tape" on page 124 for
l
more information.
Change filters. See "Replace Analyzer Filters" on page 123 for more information.
l
Analyzer operation utilities (see the following information)
l
Analyzer Operation Window
The Analyzer Operation provides four utility functions which may be useful when performing
service on an analyzer.
Tape Advance and Release Analyzer can be performed while analyzer is in monitor.
l
Open Gate and Close Gate can only be performed in idle mode.
l
To Open Gate
Set analyzer to idle in the Runtime Options window.
1. Touch Main Screen, Menu, Maintenance then Analyzer Operations.
2. Touch the module number on the module keypad.
3. Select Gate Open.
4. When finished, press Gate Close and return analyzer to monitor mode in Runtime Options
window.
Vertex M 108 User Manual