Honeywell Vertex M User Manual page 142

Symptom
Vertex M not appearing on network
Symptom
No image from one or more ChemCam
Poor image quality
Communications
Problem
Incorrect network connection
Windows not configured for network
Problem
Defective camera
Defective USB port
Camera settings are incorrect or illumination LED has failed
Check cable connection to Ethernet port
Note: Use only the Ethernet connection on the back of the data acquisition
computer. The Ethernet hub in the Vertex M system is only for Vertex M internal
use.
Use Windows Network control panel to configure network
Vertex M computer name is Vertex_293-xxxx
Default workgroup is Workgroup
ChemCam
Contact Honeywell
Use any other spare USB port
Contact Honeywell
Recovery
Recovery