Event History - Honeywell Vertex M User Manual

5.5.1 Event History

An event is any action that the Vertex M system is required to enter into the database. As events
occur, the Vertex M system stores the events in a database on the DAq PC. The default
database format is Microsoft Access.
Use the Event History Window to sort and filter data in the event log.
Events include but are not limited to:
Alarms and faults
l
User log in and log outs
l
Configuration changes
l
System maintenance
l
Security changes
l
Time and date of power up
l
User comments
l
The peak concentration during an alarm is
reported in the Conc/Data field of the
reset event. This supplements the
concentration reported in the Alarm event,
which is the first concentration reported
by the Vertex after an alarm threshold is
first exceeded.
Vertex M
Figure 5-3. Event History
Each event record contains the following
minimum information:
Date and time of the event
l
Module name
l
An event message which may include
l
alarm status, user login state or a
comment.
Logging station computer name
l
To view the event log, choose Main Screen,
Review and then Event History.
Unless sorted, Vertex displays events in
descending order with the most recent event at
the top of the display.
92 User Manual