Honeywell Vertex M User Manual page 197

Folder
Count
Reset 0
Monitor 9
SGas_Name 72
Unit 72
Note: The Vertex M uses the same OPC server as the Vertex. Thus numerous OPC tags exist for
non-existent analyzers. Tags for points greater than 24 or analyzers greater than 3 are not
populated and invalid.
Vertex M
Recommended
Tag
for most HMI
systems
Y
Table 8-7. Tag Names
Tag Name Value Interpretation / Descrip-
Format
equivalent to Filter Left as
displayed in Diagnostics/Anlyzer
Info.
Integer monitoring state for
entire analyzer , see table below
0 = Idle
1 = Pyrolyzer Warmup
2 = Monitoring
Az# 3 = Loading Chemcassette
4 = Loading new program
5 = Loading new configuration
6 = Flow auto-balance
7 = Performing Line Integrity
Test
String gas name abbreviation,
##_1
e.g. AsH
String, either ppm ppb or
##_1
mg/m
197
tion
3
3
User Manual