Series 1 Rack Network Interface And Options - Honeywell Vertex M User Manual

8.7 Series 1 Rack Network Interface and Options

Network interface options currently available on Vertex M are:
Standard:
OLE for Process Control (OPC) Interface. See "OLE for Process Control (OPC) Interface" on the
facing page for more information.
Options:
The Vertex M can be fitted with any one of six optional fieldbus interfaces as summarized in
table F-1.
Protocol Name
Profibus - DP
DeviceNet
ControlNet
DF1
ModBus Plus
LonWorks
Modbus/TCP
Ethernet/CIP
* Part Number obsolete
Do not install routers between the optional PLC fieldbus networks and the internet. These
networks are not de- signed to resist cyberattack so their cabling must have rigorous
physical isolation from malicious traffic.
Optional Remote Display Software.
The Vertex M can be ordered with an optional remote display capability as described in see
"Vertex M Remote Display Setup" on page 212
Vertex M
1295-0275
1295-0329
1295-0394*
1295-0343
1295-0330
1295-0328
1295-0520
1295-0519
Table 8-5. Vertex M Fieldbus Options
CAUTION
190
Honeywell part number
User Manual