Honeywell Vertex M User Manual page 233

Gateway Configuration
The gateways have a dedicated Ethernet port for configuration and an internal webserver at
address 192.168.0.10/24. To change the fieldbus settings such as memory size or address,
connect an external PC with a web browser to this port. The internal DAq cannot be used .
Establishing an Ethernet connection requires that the client be on the same subnet as the
server. An example of a suitable Ethernet configuration in Microsoft Windows 11 is shown in
Figure 8.34.
Figure 8.34 Example PC Ethernet Configuration
An example webpage served by the gateway is shown in Figure 8.35.
Figure 8.35 Anybus Communicator Home page
The Ethernet/IP section of the gateway must be configured for communication to take place.
Gateways purchased from Honeywell will have the internal port preconfigured like this.
Vertex M 233 User Manual