Security Access - Honeywell Vertex M User Manual

5.6.6 Security Access

RSView32 under Windows 7
Access to Vertex M functions is by a permission list which is stored in a user account. Only
users authorized access to Security Setup may create or change user accounts. The system
administrator assigns permission to Security Window and other protected functions by using
the Security Setup menu.
The Vertex M System comes pre-programmed with two user accounts: default user and a
system administrator account. The system administrator account will have both User ID and
Password set to ADMIN.
To create or edit a user account:
1. Touch Main Screen, Project and then Login. Enter your user name and password.
2. Touch Main Screen, Menu and then Security.
Note: You must have been previously assigned access to the security setup menu.
3. Enter a new name or select an existing name.
4. Select the permission codes (see list below) to assign to the user account. Both the user
account and code lists display. Bit P has no effect.
5. Enter SECURITYTRIG in the Login Macro text box.
6. Choose Prev or Next to move to other names on the Account list.
7. Choose Close when finished.
Note: If SECURITYTRIG is not entered in the Login Macro text box, the Vertex M software will
not update access privileges when the Security Window closes.
The administrator can set up multiple accounts which allows less-trained personnel to install
Chemcassette cartridges without knowing the system administrator password. This prevents
monitoring from being disabled for significant periods of time or changes (accidental or
Vertex M 114 User Manual