Honeywell Vertex M User Manual page 102

To Disable or Enable a Point
Disabling a point prevents the system from triggering false alarms during testing and
maintenance. Vertex M will not perform point specific fault checks on disabled points.
1. Choose Point Enable/Disable from the function buttons.
2. Select the analyzer and point from the keypad. The selected point buttons turn dark gray
on the keypad.
3. Choose Selected Point Only to enable / disable a single point
or
Choose All Points for Location to enable / disable all of the points monitoring a location.
4. Touch Point Enable or Point Disable to change the state of the point.
A disabled point turns light grey. An enabled point is green in the point status window.
Vertex M 102 User Manual