System Shutdown; Vertex M System With Windows 10 - Honeywell Vertex M User Manual

Crate and pad the Vertex M to prevent damage during transport. If unsure of packing
requirements, contact the Honeywell Service department.
Leaks in the exhaust tubing connection can cause exposure to toxic gases from
remote sample areas. For leak-tight connections, follow the instructions in the
Installing Pump Exhaust Line section and the Remove Pump section. With the system
running, verify the leak integrity with a small amount of leak test fluid.

4.12 System Shutdown

Failure to properly shut down the Vertex M could result in system file corruption.

4.12.1 Vertex M system with Windows 10

1. Exit the Vertex M program. Touch Project and then Stop Project.
2. In the Windows taskbar touch Start and then Shut Down.
3. Open touch screen and set all switches and the rack power switch to Off.
Vertex M
CAUTION
CAUTION
77 User Manual