Honeywell Vertex M User Manual page 235

Some automation strategies may wish to read a subset of the data to conserve network
bandwidth or scanner memory. This may be accomplished by adjusting the I/O configuration
size with the control shown in blue in Figure 8.38.
Figure 8.38 Adjusting I/O Size
The website inside the gateway can monitor the 244-byte Vertex M status array. This can aid
debugging. An example of this is shown in Figure 8.39. The byte circled in green indicates that
Pt1-1-1 is in level 1 alarm.
Figure 8.39 Example Data Monitor
Vertex M 235 User Manual