Routine Maintenance; Cleaning The Genesis Dm Monitor - Honeywell GENESIS DM Clinicians Manual

Hide thumbs Also See for GENESIS DM:

Table of Contents

Routine Maintenance

This section provides instructions for routine maintenance. Follow the instructions and safety

information carefully. Failure to do so may void your warranty.

Honeywell HomMed offers preventative maintenance services at the fees and terms stipulated in your

contract. If you wish Honeywell HomMed to perform any services, contact Customer Service.

ELECTRIC SHOCK

Electrical components contain sufficient voltage to cause death or serious injury.

DO NOT disassemble.

DO NOT autoclave, ethylene oxide sterilize, or immerse in water or other liquid.

DO NOT spray any cleaners on or into the unit.

UNPLUG before cleaning, disinfecting, or performing any maintenance.

For service, call Honeywell HomMed Customer Service.

Clean only the surfaces of the monitor and the accessories. Qualified service technicians must perform

any cleaning, servicing, or repairs that require disassembly.

Unplug the Genesis DM monitor. The monitor's memory retains all programmed settings even when

powered down.

Detach all accessories and peripheral medical devices.

To clean and disinfect, wipe the surfaces with isopropyl alcohol, and then wipe with a lint-free cloth

lightly moistened in water.

P.4510EN.01

GENESIS DM CLINICAL GUIDE

Routine Maintenance

CAUTION

12/5/2007

Table of Contents