Setting Up Alarms And Warnings - Cisco D9865 Installation And Configuration Manual

Chapter 4 Setup and Monitoring via On-Screen Display
Figure 4-3
Audio
C/N Margin
If you want to restore the transport stream and audio C/N margin options to their factory set (default)
Step 4
values, press the blue button (Default). A message appears confirming to restore to default values. Press
OK to confirm.
Press the green button (Save) to save and apply the settings to the receiver.
Step 5

Setting up Alarms and Warnings

Proceed as follows to set up the alarms and warnings:
From the Advanced Setup screen, select Alarms & Warnings and press OK.
Step 1
Set whether alarms and warnings are to be displayed on-screen in AW Banner (Enable or Disable).
Step 2
Note
The Active Alarms displays the number of currently active Alarms, and the Active Warnings indicates
Step 3
the number of currently active Warnings.
OL-31085-01
Audio Default C/N Margin Relationship
Audio Mute
0.0
Audio Restore
0.1
The alarms and warnings will only appear on-screen if the screen is displaying video only. The
AW Banner will not appear if EPG, Channel Banner or on-screen menus are displayed.
Cisco D9865 Satellite Receiver Software Version 2.20 Installation and Configuration Guide
Setup Menu
Audio Muted
Audio Restored
4-53