Configuring Noise Cutoffs - Cisco D9865 Installation And Operation Manual

Configuring Noise Cutoffs

Setting the Noise Cutoff parameters
The Noise Cutoffs screen allows you to set the muting thresholds for both audio
and video in the event of a noisy signal.
Proceed as follows to configure the noise cutoffs:
1. From the Advanced Setup screen, select Noise Cutoffs and press OK. A
message appears confirming that you want to edit the noise cutoffs.
2. Select Yes to edit. Otherwise, select No.
3. The following table describes each of the options:
Selection
Noise Cutoffs
4035197 Rev C
Options
Enable or Sets whether to enable or disable the noise
Disable cutoffs functionality.
D9865 Satellite Receiver Installation and Operation Guide
Description Default
Enable
4-63