Compliance Information - Cisco IPN330HD Installation Manual

Compliance Information

United States FCC Compliance
This device has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
such interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy. If not
installed and used in accordance with the instructions, it may
cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment OFF and ON, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the service provider or an experienced radio/television
technician for help.
Any changes or modifications not expressly approved by
Cisco Systems, Inc., could void the user's authority to operate
the equipment.
The information shown in the FCC Declaration of Conformity
paragraph below is a requirement of the FCC and is intended to
supply you with information regarding the FCC approval of this
device. The phone numbers listed are for FCC-related questions
only and not intended for questions regarding the connection or
operation for this device. Please contact your service provider for
any questions you may have regarding the operation or installation
of this device.
FCC Declaration of Conformity
This device complies with Part 15 of FCC Rules. Operation is
subject to the following two conditions: 1) the device may not
cause harmful interference, and 2) the device must accept any
interference received, including interference that may cause
undesired operation.
IPN330HD, IPN430MC, or IPN4320 Receiver
Models IPN330HD, IPN430MC, or IPN4320
Manufactured by: Cisco Systems, Inc.
5030 Sugarloaf Parkway
Lawrenceville, Georgia 30044 USA
Telephone: 770-236-1077
Canada EMI Regulation
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la class B est conforme à la norme
NMB-003 du Canada.
20081121 FCC Standard
AVC VIDEO LICENSE
With respect to each AVC/H.264 product, we are obligated to provide
the following notice:
THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO
LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF A
CONSUMER TO (I) ENCODE VIDEO IN COMPLIANCE WITH THE AVC
STANDARD ("AVC VIDEO") AND/OR (II) DECODE AVC VIDEO THAT WAS
ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-
COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER
LICENSE TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE
IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED
http://www.mpegla.com.
FROM MPEG LA, L.L.C. SEE
Accordingly, please be advised that service providers, content
providers, and broadcasters are required to obtain a separate use
license from MPEG LA prior to any use of AVC/H.264 encoders and/
or decoders.
ENERGY STAR Notice
®
Cisco has tested and confi rmed that the IPN330HD, IPN430MC,
and the IPN4320 set-top models meet the Tier 1 Energy Effi ciency
and Power Management Criteria specifi ed in the ENERGY STAR
Program Requirements for Set-top Boxes Version 2.0.
MACROVISION COPYRIGHT NOTICE
This product incorporates copyright protection technology that is
protected by U.S. patents and other intellectual property rights.
Use of this copyright protection technology must be authorized by
Macrovision, and is intended for home and other limited viewing
uses only unless otherwise authorized by Macrovision. Reverse
engineering or disassembly is prohibited.
Trademarks
Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc.
and/or its affi liates in the U.S. and other countries. A listing of Cisco's
trademarks can be found at www.cisco.com/go/trademarks.
AT&T, the AT&T logo, ConnecTech and U-verse are registered
trademarks or trademarks of AT&T Knowledge Ventures.
Manufactured under license from Dolby Laboratories. "Dolby" and
the double-D symbol are trademarks of Dolby Laboratories.
ENERGY STAR and the ENERGY STAR mark are registered
trademarks of the U.S. government.
HDMI, the HDMI logo, and High-Defi nition Multimedia Interface are
registered trademarks or trademarks of HDMI Licensing LLC.
HomePNA is a trademark of HomePNA Alliance.
Other third party trademarks mentioned are the property of their
respective owners.
The use of the word partner does not imply a partnership relationship
between Cisco and any other company. (1007 R)
Disclaimer
Cisco Systems, Inc. assumes no responsibility for errors or
omissions that may appear in this manual. We reserve the right to
change this manual at any time without notice.
29