Replace The O-Ring Inside The Mixer - GE AKTA avant User Manual

7 Maintenance
7.8 Replacement procedures

7.8.3 Replace the O-ring inside the Mixer

7.8.3

Replace the O-ring inside the Mixer

Maintenance interval
Replace the O-ring inside the Mixer if it is damaged, or if it is being replaced with an high
resistant O-ring for RPC runs.
Required material
One of the following O-rings are required:
•
•
•
Instruction
Follow the instruction to replace the O-ring inside the Mixer.
Tip:
Step
1
2
340
O-ring 13.1 x 1.6 mm (for Mixer chambers 0.6, 1.4, and 5 ml)
O-ring 22.1 × 1.6 mm (for Mixer chamber 15 ml)
O-ring 13,1 x 1.6 mm high resistant (product code 29-0113-26)
Use a forceps and gloves during the replacement procedure to avoid contam-
inating the Mixer components.
Action
Loosen the top section of the Mixer.
Unscrew the top section of the Mixer and pull apart the Mixer in two halves.
ÄKTA avant User Manual 29035184 AE