GE AKTA avant User Manual page 20

2 The ÄKTA avant instrument
2.1 Overview illustrations
Illustration convention
In the valve illustrations below, the following convention is used to point out the location
of the ports on the valve head. Loop valve V9-L is used as an example.
Description of standard modules
The following modules are installed in the instrument when delivered.
Module
System pump A P9 A or P9H A
20
V9-L
3E
3F
Ports located on the valve head rim are indicated outside
•
the black ring (e.g., 1E, 2E, etc.).
Ports located on the pivot part of the valve head are in-
•
dicated on the inside of the black ring (e.g., 3E and 3F).
Ports located on the valve head front are indicated by
•
an arrow (e.g., E and F).
Description
A high precision pump, which delivers buffer in
purification runs.
For further information, refer to Section 3.1 Pumps,
on page 56.
ÄKTA avant User Manual 29035184 AE