GE AKTA avant User Manual page 299

Step
4
5
6
ÄKTA avant User Manual 29035184 AE
Action
In the Phase Properties tab of the Column CIP phase:
Click Add Step to add a step.
•
Select the step and click Remove Step to remove a step.
•
To enter a value, select the cell and enter or select a new value.
•
In the Phase Properties tab of the Column CIP phase, click the Get Suggested
Steps button to get a suggested procedure for the selected column type.
Note that this function is not available for all column types.
Result: Suggested cleaning steps for the selected column type are displayed.
If several cleaning solutions are used, change settings for Inlet A and/or Inlet
B. Select one inlet for each solution. If Inlet B is used, remember to edit the
values in the %B column.
7 Maintenance
7.6 Maintenance when required
7.6.3 Perform Column CIP
299