GE AKTA avant User Manual page 135

Step
5
6
7
System properties
Follow the instruction to update the system properties.
Step
1
2
3
Note:
Note:
ÄKTA avant User Manual 29035184 AE
Action
Re-install the tubing holder in the delivery arm.
Connect the tubing from the fraction collector to port Out 10 on the Outlet
valve.
Adjust the delay volume setting in UNICORN to the volume of the tubing, see
Set the delay volume in UNICORN, on page 506 for more details.
Action
Open the system properties Edit dialog box.
In the Component types list, click Fraction collectors.
Select the Fraction collector 2 (F9-R) check box in the Component selection
list. Then click OK.
The Fraction collector check box must be selected for the Fraction collector
2 (F9-R) check box to be available.
the Fraction collector 2 (F9-R) check box is not available if the second or third
Outlet valve is installed.
4 Optional instrument modules
4.9 Fraction collector F9-R
135