5 Operation
5.6 Set pressure alarms
Step
1
2
3
4
Note:
188
Action
In the System Control module, on the Manual menu, click Execute Manual
Instructions .
Result: The Manual instructions dialog box opens.
In the Instructions box, select Alarms:Alarm pre column pressure.
Click Enabled in the Mode field.
Enter the high pressure limit in the High alarm box.
•
Click Execute.
•
For more information on pressure alarms, including the Low Alarm parameter,
see Section 9.7.4 System settings - Pumps and pressures, on page 464.
ÄKTA avant User Manual 29035184 AE