Parameterization Examples - Siemens SINUMERIK 840C Installation Instructions Manual

01.99
12.34.5
Example 1, incremental encoder:
The 2nd measuring system of the 4th and the 1st measuring system of the 3rd axis monitor
the measuring circuit of the 1st measuring system of the 1st axis.
1st axis:
3rd axis:
4th axis:
Example 2, EnDat absolute encoder
The 2nd measuring system of the 3rd axis monitors the measuring circuit of the 1st measuring
system of the 2nd axis. There, an EnDat absolute encoder is connected.
2nd axis:
3rd axis:
Note on EnDat encoders:
Only the incremental encoder part may be used for the monitoring axis.
© Siemens AG 1992 All Rights Reserved
SINUMERIK 840C (IA)
More user manuals on

Parameterization examples

Principal axis (monitored axis)
1st measuring system released for monitoring
no absolute encoder
Monitoring axis
1st measuring system released for monitoring
no absolute encoder
Monitoring axis
2nd measuring system released for monitoring
no absolute encoder
Principal axis (monitored axis)
1st measuring system released for monitoring
EnDat encoder
Monitoring axis
2nd measuring system released for monitoring
no EnDat encoder
ManualsBase.com
6FC5197- AA50
12 Functional Descriptions
12.34.5 Parameterization examples
MD 18320.3=0
MD 18320.1=1
MD 18080.0=0
MD 18322.3=1
MD 18322.1=1
MD 18082.0=0
MD 18323.4=1
MD 18323.2=1
MD 18083.0=0
MD 18321.3=0
MD 18321.1=1
MD 18080.0=1
MD 18322.4=1
MD 18322.2=1
MD 18082.0=0
12–353