Toshiba e-STUDIO206L Service Manual page 577

Multifunctional digital systems
Hide thumbs Also See for e-STUDIO206L:
Table of Contents

Advertisement

Error code
Classification
CB60
Finisher related
service call
CB80
CB81
CB82
CB83
CB84
CB90
CB91
CB92
CB93
CB94
CB95
CBA0
CBB0
CBC0
CBE0
CBF0
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
Contents
Stapler shift motor abnormality: Stapler shift motor is not
rotating or staple unit is not moving normally.
[MJ-1101/1107/MJ-1106/1108]
Backup RAM data abnormality:
Abnormality of checksum value on finisher controller PC
board is detected when the power is turned ON.
[MJ-1101/1107/MJ-1106/1108]
EEPROM data abnormality: An error occurs during the
writing of data into the EEPROM of the Finisher. [MJ-
1032/MJ-1033]
Flash ROM abnormality: Abnormality of checksum value
on finisher controller PC board is detected when the
power is turned ON. [MJ-1101/1107/MJ-1106/1108]
Finisher - Main CPU program error
Saddle Stitch Finisher - Main CPU program error [MJ-
1106/1108]
Hole Punch Unit - Main CPU program error
Paper pushing plate motor abnormality: Paper pushing
plate motor is not rotating or paper pushing plate is not
moving normally.
Saddle Stitch Finisher flash ROM abnormality [MJ-1106/
1108]
Saddle Stitch Finisher RAM abnormality [MJ-1106/1108]
Additional folding motor abnormality [MJ-1106/1108]
Saddle transport motor abnormality [MJ-1106/1108]
Stacker motor abnormality [MJ-1106/1108]
Front saddle stapler home position error: The stapler
home position detection is abnormally operated and
finished. [MJ-1106/1108]
Rear saddle stapler home position error: The stapler
home position detection is abnormally operated and
finished. [MJ-1106/1108]
Saddle Stitch Finisher side alignment motor (M15)
abnormality: The alignment motor is not rotating or the
alignment plate is not working properly. [MJ-1106/1108]
Saddle Stitch Finisher folding motor (M17) abnormality:
The folding motor is not rotating or the folding roller is not
moving normally. [MJ-1106/1108]
Stacker motor (M9) abnormality:
The stacker motor is not rotating. [MJ-1033]
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
8 - 17
Troubleshooting
P. 8-167
P. 8-168
P. 8-168
P. 8-169
P. 8-169
P. 8-170
P. 8-170
P. 8-170
P. 8-171
P. 8-171
P. 8-171
P. 8-172
P. 8-172
P. 8-173
P. 8-173
P. 8-173
P. 8-174
P. 8-175
ERROR CODE AND TROUBLESHOOTING
8

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents