(3)
After winding the wires around the pulleys, attach the wire holder jigs not to loosen the wires.
Notes:
•
When the wire holder jig is attached, make sure that the wire is not shifted or loosened.
•
The wire should come out of the slot of the wire holder jig and be passed through between the
arm and the jig.
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
SETTING / ADJUSTMENT
Wire holder jig
Fig.6-36
6 - 56
Arm
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved