Toshiba e-STUDIO206L Service Manual page 328

(29) Run the harness through the clamp. Then
run it through the hole in the equipment and
wire it to the front side as shown in the right-
hand figure.
(30) Connect 1 connector and install 3 clamps.
(31) Connect 1 connector.
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
DISASSEMBLY AND REPLACEMENT
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
4 - 188
Fig. 4-537
Fig. 4-538
Fig. 4-539