Toshiba e-STUDIO206L Service Manual page 105

13.2nd transport sensor (S14)
This sensor detects whether paper from the lower drawer, PFP or LCF (both optional) is being
transported or not.
14.Upper/Lower drawer feed clutch (CLT4/CLT5)
These clutches drive the upper and lower drawer pickup rollers. When these clutches are turned ON
while the main motor (M8) is being rotated, the drive from these clutches rotates the pickup rollers
so as to pick up paper.
15.Hi-speed clutch (CLT6)
Drives the Transport roller at high speed by transmitting the drive from the main motor.
16.Low-speed clutch (CLT7)
Drives the Transport roller at low speed by transmitting the drive from the main motor.
17.Registration roller clutch (CLT2)
Drives the registration roller.
18.Bypass feed clutch (CLT3)
This clutch drives the rotation of the bypass feed roller. When this clutch is turned ON while the main
motor (M8) is being rotated, the drive from this clutch feeds and transports paper on the bypass tray
to the inside of this equipment.
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
3 - 57
OUTLINE OF THE MACHINE
3