[EAA0] Paper remaining in Saddle Stitch Finisher
Classification
Finisher jam
(Saddle stitcher section)
MJ-1106/1108
Check item
Finisher, saddle stitcher
Paper
Junction box paper detection sensor
(S26)
Transport path-2 (S27)
Transport path-3 (S28)
Ejecting roller sensor(S29)
Interface PC board (I/F)
Saddle stitcher controller board
Replace parts
Junction box paper detection sensor
(S26)
Transport path-2 (S27)
Transport path-3 (S28)
Ejecting roller (S29)
Interface PC board (I/F)
Saddle stitcher controller board
[EAB0] Paper transport jam in Saddle Stitch Finisher
Classification
Finisher jam
(Saddle stitcher section)
MJ-1106/1108
Check item
Finisher, saddle stitcher
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
Paper remaining in Saddle Stitch Finisher
•
Check if there is any paper in the finisher, saddle stitcher
or the on the transport path of the equipment. Remove it if
there is.
•
Use paper accepted in the specifications.
Do not use the paper shorter than the specification.
•
Sensor check(S26)
•
Connector check(CN8)
•
Harness check
•
Sensor check(S27)
•
Connector check(CN20)
•
Harness check
•
Sensor check(S28)
•
Connector check(CN20)
•
Harness check
•
Sensor check(S29)
•
Connector check(CN20)
•
Harness check
•
Board check
•
Connector check(CN1, CN2, CN5, CN7, CN8)
•
Harness check
•
Board check
•
Connector check(CN10, CN13, CN20)
•
Harness check
Paper transport jam in Saddle Stitch Finisher
•
Check if there is any paper in the finisher, saddle stitcher
or the on the transport path of the equipment. Remove it if
there is.
•
Use paper accepted in the specifications.
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
8 - 105
Error item
Measures
Remarks
Error item
Measures
ERROR CODE AND TROUBLESHOOTING
8