[Ea23] Paper Transport Stop Jam (Transport Sensor); [Ea24] Paper Transport Stop Jam (Between Entrance & Transport Sensor); [Ea25] Paper Transport Stop Jam (After Paper Stack Exit); [Ea26] Paper Transport Stop Jam (Stop Command Request) - Toshiba e-STUDIO206L Service Manual

MJ-1101/1107
Check item
Entrance sensor
Transport sensor
Parts to be replaced
Entrance sensor
Transport sensor
Finisher controller PC board
MJ-1106/1108
Check item
Finisher
Entrance sensor (S1)
Transport sensor (S2)
Finisher control PC board
(FIN)
Parts to be replaced
Entrance sensor (S1)
Transport sensor (S2)
Finisher control PC board
(FIN)

[EA23] Paper transport stop jam (transport sensor)

[EA24] Paper transport stop jam (between entrance & transport sensor)

[EA25] Paper transport stop jam (after paper stack exit)

[EA26] Paper transport stop jam (stop command request)

[EA27] Paper transport stop jam (paper not inserted)
[EA28] Paper transport stop jam (paper holder plate operation delay)
[EA29] Paper transport stop jam (stack transport delay)
Classification
Paper jam in finisher section
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
Measures
• Sensor check(S1)
• Connector check (CN7, CN22)
• Harness check
• Sensor check(S2)
• Connector check (CN7, CN22)
• Harness check
Remark
Measures
Check if there is any paper in the finisher or on the transport path of
the equipment and remove it if there is.
• Sensor check
• Connector check
• Harness check
• Sensor check
• Connector check
• Harness check
• Board check
• Connector check (CN6, CN26)
• Harness check
Remark
Error content
Paper transport stop jam
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
8 - 95
ERROR CODE AND TROUBLESHOOTING
8