9.3.9
Procedures when replacing EEPROM
A procedure for replacing the EEPROM is shown below.
[A] Replace EEPROM
(1)
Confirm that the main power switch is turned OFF.
(2)
Replace the EEPROM.
(3)
Start up with the Setting mode (08).
(4)
Copy the data in the SRAM to the EEPROM (08-4581).
(5)
Turn the power OFF.
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
Start
[A] Replace EEPROM
Settings completed
Fig. 9-47
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
9 - 37
REPLACEMENT OF HDD/PC BOARDS
9