Toshiba e-STUDIO206L Service Manual page 201

(6) Disconnect 2 connectors [5]. Remove 1
screw [6].
Notes:
Connect the flat harness to the laser optical
unit with its electrode side to the front. A
"CA20" error will be displayed if the
connection is incorrect.
(7) Release the harness from the 2 clamps [7] of
the laser optical unit.
(8) Take off the laser optical unit [8].
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-174
Fig. 4-175
Fig. 4-176
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
4 - 61
DISASSEMBLY AND REPLACEMENT
4