Relation Between The Jamming Area And The Corresponding Sensors/Covers; Paper Remaining Jam On The Transport Path - Toshiba e-STUDIO206L Service Manual

Relation between the jamming area and the corresponding sensors/covers

(If a jam is occurring in the ADU, LCF, PFP, JSP or OCT check the board in each unit.)
Jamming area
Registration area Automatic duplexing
unit
Exit area Automatic duplexing
unit
ADU ADU
Feeding area Feed cover
(Main unit)
LCF LCF side cover
PFP PFP side cover
Bridge unit Bridge unit
JSP JSP cover
OCT OCT cover
Finisher Finisher door
[E551] Paper remaining jam on the transport path (when a service call occurs)
[E552] Paper remaining jam on the transport path (when the cover is closed)
Classification
Other jam
Step Check Item
Jamming transport path
1
Sensor in the jamming area
2
LGC board
3
Notes:
If the jam is occurring in the ADU, LCF or PFP, check the board in each unit.
Parts to be replaced
Sensor in the jamming area
LGC board
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
Cover
Registration sensor
1st transport sensor
Exit sensor
ADU entrance sensor
ADU exit sensor
2nd transport sensor
LCF feed sensor
PFP upper drawer feed sensor
PFP lower drawer feed sensor
Bridge unit transport sensor-1
Bridge unit transport sensor-2
JSP feed sensor
OCT feed sensor
Sensors in the finisher
Error content
Paper remaining on the transport path when printing is finished
(when a service call occurs) (E551)
Paper remaining on the transport path when printing is finished
(when the cover is closed) (E552)
Result
Remark
Refer to the table below.
8 - 77
Sensor Test mode/Input check
03-[FAX]ON/[9]/[A]
03-[FAX]OFF/[6]/[A]
03-[FAX]ON/[9]/[B]
03-[FAX]OFF/[1]/[D]
03-[FAX]OFF/[1]/[E]
03-[FAX]OFF/[7]/[A]
03-[FAX]OFF/[4]/[C]
03-[FAX]OFF/[2]/[B]
03-[FAX]OFF/[3]/[B]
03-[FAX]ON/[4]/[G]
03-[FAX]ON/[3]/[G]
03-[FAX]ON/[4]/[F]
03-[FAX]ON/[3]/[G]
03-[FAX]ON/[3]/[G]
03-[FAX]ON/[3]/[G]
-
Measure
Open the cover of the unit/area whose
picture is flashing on the control panel
and remove any paper on the transport
path.
• Sensor check (Refer to the table
below)
• Harness check
• Connector check
• Harness check
• Connector check
• Board check
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
ERROR CODE AND TROUBLESHOOTING
8
Next
Step