Toshiba e-STUDIO206L Service Manual page 307

(5) Install the Scanner Damp Heater (Right) on
the lens cover with 2 screws.
(6) Connect the connector of the harness and
install the clamp to the lens unit.
(7) Insert the connector into the lens unit.
(8) Install the lens cover with 4 screws.
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-477
Fig. 4-478
Fig. 4-479
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
4 - 167
Scanner Damp
Heater (Right)
Lens cover
DISASSEMBLY AND REPLACEMENT
4