[5Bd0] Power Failure During Restoration; [5C10] Fax Unit Attachment Error; [5C11] Network Fax Transmission Error; [5C20] Data Import From Topaccess Succeeded - Toshiba e-STUDIO206L Service Manual

[5BD0] Power failure during restoration

Classification
TopAccess related error
Check item
Setting

[5C10] FAX Unit attachment error

Classification
TopAccess related error
Check item
Setting

[5C11] Network FAX transmission error

Classification
TopAccess related error
Check item
Setting

[5C20] Data import from TopAccess succeeded

Classification
TopAccess related error
Check item
Setting
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
ERROR CODE AND TROUBLESHOOTING
Power supply is cut off during the restoration of database sent
from TopAccess
• Check if the power cable is connected properly and is
inserted securely.
• Check if the power voltage is unstable.
• Reattempt the restoration of the database (Address Book,
templates, F-code (Mailbox) or user information).
Network FAX is disabled because the FAX Unit is not
attached
• Check if the FAX Unit is attached.
• Check if there is any damage or abnormality on the FAX
board.
• Check if the connector on the FAX board is connected
properly.
The network FAX job failed because the specified address is
not registered in the Address Book
The address specified for the network FAX is not
registered on the Address Book. Register it.
Displayed when data have been imported from TopAccess
(Not an error message)
Data (Address book, department or user information) have
been imported successfully. No troubleshooting is
required.
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
8 - 262
Error item
Measures
Error item
Measures
Error item
Measures
Error item
Measures