Toshiba e-STUDIO206L Service Manual page 83

Clear paper symbol is displayed (

Copying operation is disabled

Solution: The bypass paper sensor is turned OFF by removing the paper from the bypass tray.
(C) Set key copy counter
• When the key copy counter (optional) is pulled out from the equipment which installs it:
"Set key copy counter" displayed

Copying operation disabled
• When the counter is pulled out during copying:
Copying is stopped when the key copy counter is pulled out.

"Set key copy counter" displayed

Copying operation disabled
(D) Misfeed in equipment (
• Exit sensor detects jamming of the leading edge of paper.

Registration clutch ON

Less than regulation time
Exit sensor ON
If the exit sensor is not turned ON after the
regulation time

Paper jam (E010) The copying operation
is stopped
• Exit sensor detects jamming of the tailing edge of paper

© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
): E120
)
Registration clutch
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
3 - 35
ON
Exit sensor
Timer
0
Regulation time
Paper jam (E010)
Fig. 3-19
OUTLINE OF THE MACHINE
3
ON