Toshiba e-STUDIO206L Service Manual page 494

Notes:
Perform adjustment for the folding position first because the stapling position must be adjusted
referring to the folding line.
Phenomenon
Folding position
Specified
folding position
Stacker hook
Fig.6-129
Specified
folding position
Folding position
Stacker hook
Fig.6-130
Stapling position
Folding position
Stacker hook
Fig.6-131
Folding position
Stapling position
Stacker hook
Fig.6-132
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
SETTING / ADJUSTMENT
Contents
When the folding position is deviates
from the specified one by more than
-2.0 mm
When the folding position is deviates
from the specified one by more than
2.0 mm
When the stapling position is
deviated from the specified one
more than -0.50 mm
When the stapling position is
deviated from the specified one
more than 0.50 mm
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
6 - 114
Adjustment
Increase the value of the folding
position adjustment in order to move
the folding stopping position (the
position of the stapling hooks) of the
stacker upward.

P. 6-117 "[ 2 ] Folding position
adjustment"
Decrease the value of the folding
position adjustment in order to move
the folding stopping position (the
position of the stapling hooks) of the
stacker downward.

P. 6-117 "[ 2 ] Folding position
adjustment"
Decrease the value of the stapling
position adjustment in order to move
the stapling stopping position (the
position of the stapling hooks) of the
stacker downward.

P. 6-115 "[ 1 ] Saddle stapling
position adjustment"
Increase the value of the stapling
position adjustment in order to move
the stapling stopping position (the
position of the stapling hooks) of the
stacker upward.

P. 6-115 "[ 1 ] Saddle stapling
position adjustment"