Confirmation Of The Updated Data; Display During The Update - Toshiba e-STUDIO206L Service Manual

(10) Perform the initialization of the updating data.
• Press the [ON/OFF] button while simultaneously holding down the [0] and [8] buttons.
• Key in "9030", and then press the [START] button.
• Press the [INITIALIZE] button.
[B] Confirmation of the updated data
After the updating is completed, check each data version in the Setting Mode (08) to confirm that the
data were overwritten properly.
 P. 11-81 "11.7 Confirmation of the updated data"
[C] Display during the update
Update is performed in parallel as shown in the transition diagram below.
[ System firmware ] [Engine firmware] [Engine firmware]
1. SYSTEM
2. ENGINE
FIRMWARE
FIRMWARE
(OS Data)
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
Item Selection Screen for Update
[Scanner firmware] [System software]
3.SCANNER 4. SYSTEM
FIRMWARE
SOFTWARE
(HD Data)
Update Completed
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
11 - 23
[RADF firmware] [Punch firmware]
5. RADF
6. PUNCH
FIRMWARE
FIRMWARE
[Saddle firmware]
7. SADDLE
FIRMWARE
[Finisher firmware]
8. FINISHER
FIRMWARE
FIRMWARE UPDATING
11