Toshiba e-STUDIO206L Service Manual page 567

Error code Classification
E410 Cover open jam
E420
E430
E440
E450
E480
E490
E491
E510 Paper transport jam
(ADU section)
E520
E550 Other jam
E551
E552
E570 Paper transport jam
E580
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
Contents
Front cover open jam: The front cover has opened
during printing.
PFP side cover open jam: The PFP side cover has
opened during printing.
ADU open jam: The ADU has opened during
printing.
Feed cover open jam: The feed cover has opened
during printing.
LCF side cover open jam: The LCF side cover has
opened during printing.
Bridge unit open jam: The bridge unit has opened
during printing.
Job separator cover open jam: The job separator
cover has opened during printing.
Offset tray cover open jam: The offset tray cover
has opened during printing.
Jam not reaching the ADU entrance sensor: The
paper does not reach the ADU entrance sensor
after it is switchbacked in the exit section.
Stop jam in the ADU: The paper does not reach the
ADU exit sensor after it has passed the ADU
entrance sensor.
Paper remaining jam on the transport path: The
paper is remaining on the transport path when
printing is finished (caused by a multiple paper
feeding).
Paper remaining jam on the transport path (when a
service call occurs)
Paper remaining jam on the transport path (when
the cover is closed)
Jam not reaching the reverse sensor: The paper
which has passed the exit sensor does not reach
the reverse sensor.
Stop jam at the reverse sensor: The trailing edge of
the paper does not pass the reverse sensor after its
leading edge has reached this sensor.
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
8 - 7
Troubleshooting
P. 8-67
P. 8-68
P. 8-69
P. 8-70
P. 8-71
P. 8-72
P. 8-73
P. 8-74
P. 8-50
P. 8-52
P. 8-76
P. 8-77
P. 8-77
P. 8-53
P. 8-53
ERROR CODE AND TROUBLESHOOTING
8