Setup Menu: Services - Cisco PowerVu D9858 Installation And Operation Manual

Setup Menu: Services

Structure
To view the Services menu from the Main menu, press the RIGHT arrow key once
and then the SELECT key to reach the Setup menu. Then press the RIGHT arrow
key three times and the SELECT key to view the Services menu.
The Services menu allows you to setup all the operating parameters associated with
audio, video, captions and VBI services. This affects the decode channel (PE1) only
and not the transcode channel.
Each parameter is described below. The menu has the following structure:
Video
PV Format PV Output Stream
Auto HD1080i SD480i/2997
SD Format SD Output Bitrate
Auto NTSC 19.5648
TV A/R Convert Stream Act Conv
16:9 16:9 F/W 16:9 16:9 F/W
WSS Mode WSS Status
Passthrough 16:9 F/F
Audio
Aud# Stereo/Mono AC3 Compression
1 Stereo Line Mode
Aud# Left(dB) Right(dB)
1 -6.0 -6.0
Audio Decoder Aud1 Aud2
PMT Audio Source 1 2
Captions
Preferred Mode Actual Output
Auto EIA 708
VIDEO
PV Format
Description:
Parameters:
4023074 Rev B Model D9858 Advanced Receiver Transcoder Installation and Operation Guide
Main:Setup:Services
Video Audio Captions
i s
i s
i s
i s
i s
i s
i s
i s
Selects the output video format.
Fixed at SD.
1/2
i
Main:Setup:Services
Subtitles Decode
Decode
Decoder
Audio1
Subtitles
Op Mode Select Language By
Off
Language List
eng
Imitext Position
Standard
2/2
i s
Enabled i s
Yes
i s
Language List
PMT Order Entry
i s
First eng
ForeGnd BackGnd
i s
Auto Auto
4-37