Cisco PowerVu D9858 Installation And Operation Manual page 70

Status Menu: TS Input,
NetID
Description:
Parameters:
TxID
Description:
Parameters:
LNB Stat
Description:
Parameters:
LNB Power
Description:
Parameters
Polar
Description:
Parameters:
LO Select
Description:
Parameters:
PROGRAM PIDS
PE
Description:
Parameters:
Name
Description:
Parameters:
Type
Description:
Parameters:
4-18 Model D9858 Advanced Receiver Transcoder Installation and Operation Guide
Continued
Indicates the Network ID of the uplink signal the transcoder is to
receive when using the selected preset. The transcoder's Network
ID must match the Network ID associated with the transmitted
signal that identifies the NIT to be used.
Note: Each network must be assigned a unique ID (number).
1 to 65535.
Indicates the Transport ID.
1 to 65535.
Indicates the current LNB connection status.
Overload, OverTemp, No Connect, Normal or N/A.
Indicates the LNB voltage at the received input port.
Off, 13V or 18V.
Indicates the polarity of the received signal.
Hor, Vert or Auto.
Indicates whether a 22 kHz tone is available on input port RF1. This
is applicable for dual-band applications.
On, Off or Auto.
Indicates the Program Entry number.
1 to 4.
Indicates the name assigned to the Program Entry.
Up to 4 alphanumeric characters.
Indicates the type of program associated with incoming PID.
PMT, PCR, VID, AUD, SUBT, CDT, ECM, EMM, DATA, MPE, VBI
or DPI.
4023074 Rev B