Cisco PowerVu D9858 Installation And Operation Manual page 118

Setup Menu: Outputs: TS Out: DPM,
TOT
DIT
SIT
ECM
EMM
DRT
CDT
9. Press MENU to exit the menu and save the data. If the changes cannot be saved/
made, a message will be displayed indicating "Bad configuration data". In this
case, the menu will revert to the previously saved configuration.
Note: When remapping an input program channel to an output channel,
ensure that the PIDs are mapped to different PIDs to avoid PID collisions.
4-66 Model D9858 Advanced Receiver Transcoder Installation and Operation Guide
Continued
Parameter Description
Pass
Pass
Pass
Drop
Drop
Drop
Drop
4023074 Rev B