Status Menu: Ts Input - Cisco PowerVu D9858 Installation And Operation Manual

Status Menu: TS Input

SymRate
Description:
Parameters:
FEC
Description:
Parameters:
Modulation
Description:
Parameters:
IQ
Description:
Parameters:
Pol
Description:
Parameters:
Dnlk Freq
Description:
Parameters:
L-Band
Description:
Parameters:
Pilot Present
Description:
Parameters:
C/N
Description:
Parameters:
C/N Margin
Description:
4-16 Model D9858 Advanced Receiver Transcoder Installation and Operation Guide
Indicates the Symbol Rate of the received signal.
Msymbols/second.
Indicates the FEC (Forward Error Correction) rate of the received
signal.
N/A, 1/2, 2/3, 3/4, 5/6, 7/8, 8/9 or Auto.
Indicates the modulation type for the received signal.
N/A, QPSK, 8PSK, DVB-S or DVB-S2.
Indicates the IQ (Input Signal Inversion) for the received signal.
Inv, NonInv or Auto.
Indicates the signal polarization setting. This setting is only
applicable when LNB Power is set to H-NIT or V-NIT. The selected
setting must match the polarization of the transmitted signal.
Hor, Vert or Auto.
Indicates the current downlink frequency.
GHz.
Indicates the current L-Band frequency.
MHz.
Indicates whether a Pilot is present for the received signal. The Pilot
is set on the modulator for input signal synchronization purposes.
Yes or No.
Indicates the current Carrier-to-Noise rate.
dBm.
Indicates the current Carrier-to-Noise Margin for the received
signal. The Carrier-to-Noise margin is the actual distance that C/N
is from the noise threshold.
4023074 Rev B