Cisco PowerVu D9858 Installation And Operation Manual page 150

Alarm Message
Type
BOOT HOST Set
Clear
5-10 Model D9858 Advanced Receiver Transcoder Installation and Operation Guide
Message
KB not accessible
LCD not connected
Host FLASH Not
Found
Host EMI SDRAM
Test Failed
Host BOOT Invalid
Host FPGA Invalid
Host APP Invalid
BOOT passed
Cause/Remedy
Cause: Hardware
issue
Remedy: Clear
alarms, reset unit,
and notify customer
service if problem
persists.
Description Severity
KB is not Major
detected by Boot
code.
LCD is not
detected by Boot
code.
Flash memory
not detected.
RAM Failure -
memory testing
failed.
Boot SW cannot
be read from
memory
correctly.
FPGA Image
cannot be read
from memory
correctly.
Application SW
cannot be read
from memory
correctly.
4023074 Rev B