Cisco PowerVu D9858 Installation And Operation Manual page 59

Startup Screen,
Continued
LCD Setting
RF
Freq:
Lvl:
Marg:
Hourglass
Assigning a Program Channel to a Program Entry
To assign a program to a Program Entry:
1. Press MENU until you display the startup screen.
PE1 (the decode Program Entry) is initially displayed.
2. Press the ADV key on the front panel keypad and then the UP or DOWN arrow
keys to scroll through the PEs available.
3. Press the SELECT key to select a PE (PE1 or PE2) and then the RIGHT arrow key
to move to the right and scroll through the available program channels.
PE #
PE1
RF1
4023074 Rev B Model D9858 Advanced Receiver Transcoder Installation and Operation Guide
Active RF input port. Note: ASI will be shown if the ASI
input port is active.
Downlink frequency of the tuned signal in GHz
Signal level
Carrier-to-noise (C/N) margin in dBm
Indicates that parameters are being saved in the
background. You can continue to perform any operation
desired.
Note: If a power- cycle/interruption occurs while the
hourglass is displayed, some parameters may not be saved.
Refrain from powering off the unit while the hourglass is
displayed.
Ch #
706 Channel Name
Freq:12.658 Lvl:100 Marg:9.9e-9
Description
s
4-7