Cisco PowerVu D9858 Installation And Operation Manual page 107

Setup Menu: Outputs: TS Out: MOIP1,
v46
DestAddr
Description:
Parameters:
UDPPort
Description:
Parameters:
SrcPort
Description:
Parameters:
TS/IP
Description:
Parameters:
Min IP/s
Description:
Parameters:
PCR@IP Start
Description:
Parameters:
SAP
Description:
Parameters:
4023074 Rev B Model D9858 Advanced Receiver Transcoder Installation and Operation Guide
Continued
Enter the MPEGoIP destination IP address.
0 to 255 for each of the four fields in the format ###.###.###.###.
This selects the destination UDP port number.
1 to 65535.
This selects the source UDP port number.
1 to 65535.
This selects the maximum number of transport packets per IP
packet.
1 to 7.
This selects the minimum number of transport packets per IP
packet.
1 to 7.
This selects whether to always transmit a new Ethernet Packet
when a new Program Clock Reference (PCR) arrives.
Yes, No.
This selects whether to use the configured SAP string as the channel
name.
Yes or No.
4-55