Cisco PowerVu D9858 Installation And Operation Manual page 103

Setup Menu: Outputs: TS Out: ASI,
Descramble Mode
Description:
Parameters:
Regenerate
Description:
Parameters:
Insert Null Packet
Description:
Parameters:
MOIP1
Name
Description:
Parameters:
Rate Control
Description:
4023074 Rev B Model D9858 Advanced Receiver Transcoder Installation and Operation Guide
Continued
This parameter selects whether the transcoder should scramble the
output even if it is authorized to receive the channel.
Scrambled or Descrambled. Default is Descrambled.
Descramble Mode
Scrambled
Descrambled
This selects whether to regenerate the PSI tables.
Always or As Needed.
This parameter selects whether to insert null packets in the output
stream.
Yes, No. It is recommended that this field always be set to Yes to
ensure the best compatibility with equipment that the D9858
transcoder is to be connected.
This is the name assigned to the transport output for ease of
reference.
20-character string.
This is the DPM output rate control (in Mbps) when using an RF
input source.
Description
Scrambles the output channel even if the
PE is authorized and can descramble the
channel.
Descrambles the output channel, and
passes in-the-clear channels.
4-51